FK1462 Ⓑ P0109YIJK-1MEDHANDS FREE COLOR VIDEO INTERCOM MASTER MONITOR STATIONINTERPHONE VIDEO COULEUR MAINS LIBRES MONITEUR MAÎTREHANDENVRIJE KLEURENV
- 10 -EnglishFrançaisNederlands7-7 Automatic night volume adjustmentThis automatically lowers the communication volume at the door station only at nig
- 11 -English Français Nederlands7-9 Press-to-talk settingThis disables the press-to-talk setting during communication with a door station (section 8-
- 12 -EnglishFrançaisNederlands 8 OPERATIONS8-1 Answering a door call (HANDS-FREE mode, PTT mode)1 Press CALL button.2 Chime tone sounds, caller is
- 13 -English Français Nederlands8-3 Entrance monitoring1 Press MONITOR button in the standby mode.2 The video monitor displays the image from the
- 14 -EnglishFrançaisNederlands8-6 Pan/tilt operation1 When a zoom picture is displayed, press , , , or button. • []: Up• []: Down• []: Left
- 15 -English Français Nederlands8-9 Backlight adjustment, Night sensitivity adjustmentTo perform adjustment1 Press ADJUST button when the image is
- 16 -EnglishFrançaisNederlands8-12 Play recorded pictureIf there are automatically recorded pictures, such as those taken while you were out, the pla
WarrantyAiphone warrants thats its products have no material or workmanship defects under normal use conditions for two years after delivery to the en
- 2 -EnglishFrançaisNederlandsPRECAUTIONSGeneral Prohibitions Prohibition to Dismantle the Unit Prohibition on Subjecting the Unit to Water G
- 3 -English Français Nederlands 2 INSTALLATION2-1 Mounting locations1 Install the master monitor station in a place where the screen is not exposed
- 4 -EnglishFrançaisNederlands 3 WIRINGInsert wires securely into each terminal as shown.JK-1HD-+JK-1MEDOPEL-12SOPIER-21EA1 A2JK-DVFJK-DVJK-DADOORPS-
- 5 -English Français Nederlands 3 WIRINGInsert wires securely into each terminal as shown.JK-1HD-+JK-1MEDOPEL-12SOPIER-21EA1 A2JK-DVFJK-DVJK-DADOORP
- 6 -EnglishFrançaisNederlands 4 MOUNTINGBack wiringJK-1MED128mm(3/8")1. Press RELEASE button (to insert or remove the wire).2. Insert the cab
- 7 -English Français Nederlands 6 OPERATING METHODTo operate this unit, check the symbol and then press the appropriate operation button This is not
- 8 -EnglishFrançaisNederlands7-3 SET THE DATE/TIME1 After performing steps 1 and 2 in section 7-1, select "DATE/TIME" and press MENU butt
- 9 -English Français Nederlands7-5 EXTERNAL INPUT SETTINGWhen optional units operate (for example, when a sensor is activated or call button is press
Comments to this Manuals