Aiphone JDW-C User Manual download pdf

INSTALLATION MANUAL

JDW-C (Sensor Camera)

®AIPHONE

Providing Peace of Mind

0305®

NAMES & FUNCTIONS

SPECIFICATIONS

Model No.

JDW-C

Power Supplied from the master station

Operating temperature range -10-+50 °C

Storage temperature range -20 - +60 °C

Operating humidity range 85% (max.)

Picture eiement

1/3-inch color CCD

Camera angie of view (horizontai x verticai)71.5° X 53.4° (f=3.8)

Minimum iilumination 1.0 lux

Sensor operation display iight Lights up green when the sensor detects something (Can be switched OFF with the select switch)

Sensor detection method

Heat ray type

Sensor detection area Max. 5 meters, approx. 70°

Sensor detection speed

0.3 - 1.5 m/sec.

Sensor sensitivity switching Switchable among three levels H (high), M (medium), and L (low)

Sensor startup time Approx. 30 sec. after power comes on

External sensor input

An external sensor can be connected and operated in either an "AND" or "OR" configuration with this unit.

Internal sensor switching The internal body detection sensor can be controlled to be "ON" or "OFF".

Internal speaker

The internal speaker can be controlled to be "ON" or "OFF" with the speaker select switch.

Internal mic. The mic. sensitivity can be adjusted with the mic. sensitivity volume.

Master station switch Switchable according to the master station version.

Arrgle adjustment range

Camera

+50° left/right, -20° to -55° up/down (The horizontal direction is 0°.)

(The left/right and up/down angles can both be changed in increments of 5°.)

Sensor

±50° left/right, -20° to -55° up/down (The horizontal direction is 0°.)

(The left/right angle can be changed in increments of 10° and the up/down angle in increments of 5°.)

Installation places

Indoors/Outdoors

Protective structure Weather-resistant

Weight Approx. 400 g

Dimensions (mm)

102 (W)x 182 (H)x94 (D)

SAFETY CAUTIONS

■ Precaution notation

This installation manual uses various symbols for the sake of safe usage.

The results that can occur from ignoring these indications and handling this equipment incorrectly are categorized as follows.

Icon display example

^ symbol indicates a prohibition. The specific content

prohibited is drawn in or near the figure. (For the figure

on the left, disassembly is prohibited.)

Q symbol indicates behavior that is mandatory and gives

directions.

This indicates that ignoring the contents of

\AfADMIMP

the warning and handling the equipment

VVAnIXI 1

l\lvj

incorrectly can result in death or severe

injury.

This indicates that ignoring the contents of

r* Л

warning and handling the equipment

j \

ими MUIN incorreetly can result in personed injury

■ '

and/or damage to equipment.

Do not disassemble

or alter.

Do not disassemble or alter this

equipment. Doing so would be

dangerous. Fire or electric shock

could result.

Use in areas with water

or high humidity is

prohibited.

This product is weather resistant,

but do not install it in a bathing

room or other place with extremely

high humidity, any place where

water might get into it, or in water. 11

Do not spray water directly on this

equipment, for example with a hose.

Fire, electric shock, and equipment

damage could result.

Electric shock caution

Do not touch the main unit with

damp or wet hands. Electric shock

and equipment damage could

result. When existing chime wiring

is used, it is possible that it contains

AC power. This can cause

equipment damage and electric

shock. Have the installation done

by an electrical contractor, low

voltage contractor, or qualified

personnel.

Install securely.

Install securely to a solid location

so that the equipment can not drop M

from its own weight. Equipment ww

falling could result in injury.

Notice

This product detects a person, provides notice, and shoots images. It is not an anti-theft device.

Aiphone does not bear responsibility for any damage incurred in the event of theft or other such incident.

CAUTION

— Installation precautions/iy-

■ For correct installation

Do not install in the following places.

Any place hlown on by a fan, the

outdoor unit of an air-conditioner,

or any other place subject to

sudden temperature changes.

Any place where sunlight gets in

the angle of view of the sensor

camera directly or indirectly.

Any place too close to

fluorescent lamps or directly

facing powerful illumination.

On any surface that moves or is

affected by wind.

\V\ ^

Ì1

Any place too close to a source

of electrical noise, for example a

broadcasting station or wireless

station of гту kind.

Any place where the detection

area or camera angle of view will

be blocked off.

In or near any place subject to

steam or oil from an exhaust

duct.

Connection precautions/^-

KJse two conductor wire from the JDW-C to the master station. Do not use coaxial cable.

►When using two cameras, always use one two conductor wire for each camera. If you connect two cameras with one multi

conductor wire, the cameras may not operate correctly.

>If the wiring is routed together with high voltage AC wiring, other power wiring, wiring for electrical lights, and telephone

lines, this can disrupt the picture and sound quality and cause malfunction. Either use separate conduits or run wires in

separate paths from each other.

> When existing wiring is used, for some type of wiring, this system may not operate correctly. Changing the wiring restores

normal operation.

TROUBLESHOOTING

©The unit does

not operate.

•No power is being supphed from the

master station.

• Wire the master station eorreetly to supply power.

• The wiring is incorrect or a line is open or

shorted.

• Wire correctly. (See "MOUNTING AND CONNECTION".)

• The unit was wired to the master station

with power supplied.

• Keep the power OFF until the wiring is completed.

• The master station select switch setting is

reversed.

• Set "A" and "B" correctly. (See "SETTINGS".)

©The system does

not detect

people.

• The detection area is not eorrectly set. • Check the detection area and camera angle of view area emd install so that

people are detected. (See "ADJUSTMENTS".)

• People are passing nearly directly under

the sensor camera.

• Adjust the up/down angle to point down so that they are detected.

• People are coming directly at the camera.

• This is not a breakdownf. Because of the characteristics of a heat ray type

sensor, it may have difficulty detecting people coming directly at the camera.

As much as possible, install in such a way that people cut across the detection

area. (See "ADJUSTMENTS".)

• Connect an external sensor in "OR mode" so that people cut across the

detection area. (See "SETTINGS".)

• The detection area is cut off by glass.

• This is not a breakdown. A heat ray type sensor cannot detect objects through

glass. Install in a place where the detection area is not cut off by the glass.

(See "MOUNTING AND CONNECTION".)

•With the external sensor input function in

"AND mode", people are only detected

by the main sensor or by the external

sensor but not by both.

• This is not a breakdown. Set the detection area for each sensor so that people

are detected by both sensors. (See "SETTINGS".)

• The internal sensor switch is "OFF". • Switch "ON" the internal sensor switch.

©Sound cannot be

heard from the

unit.

• The speaker select switch is "OFF". • Switch "ON" the speaker select switch.

•The master station select switch is "B".

• Switch the master station select switch to "A". (Sound cannot be heard from

the unit when the master station is JA-2MECD or JA-2MCD.)

heard from the

master station.

• The wiring is incorrect or a line is open or

shorted.

• Wire correctly. (See "MOUNTING AND CONNECTION".)

• The mic. sensitivity volume is at the

"Low" side.

• Turn the mic. sensitivity volume to the "High" side. (See "SETTINGS".)

©There is

howUng.

• The sensor camera is installed too close

to the master station.

• This is not a breakdown. Install the sensor camera farther from the master

station or turn the mic. sensitivity volume to the "Low" side until there is no

howling.

©The sensor is

detecting but

the detected

objects are not

displayed on the

screen.

• There is a dog or cat or other small

animal in the detection area.

• Set the sensor sensitivity switch to "L (Low)". (See "SETTINGS".)

• Recommend to connect an external sensor and use it in "AND mode". (See

"SETTINGS".)

• There is something that moves in the

detection area, for example a flag or tree

blowing in the wind, or there are sudden

temperature changes.

• Set the sensor sensitivity switch to "L (Low)". (See "SETTINGS".)

• Either move the moving object or the object causing the sudden temperature

changes outside the detection area or change the area setting. (See

"SETTINGS".)

• The external sensor area does not match

the camera angle of view.

• Align the external sensor area emd the emera angle of view. (See

"ADJUSTMENTS" and "SETTINGS".)

dark, blurred, or

not displayed at

aU.

• The wiring is incorrect or a line is open or

shorted.

• Check the wiring and wire correctly. (See "MOUNTING AND

CONNECTION".)

• The camera window is dirty. • Clean the lens with lens cleaner or with a clean, soft, damp cloth.

• The outside temperature dropped

suddenly and the camera window has

fogged up.

• When the temperatures inside and outside the product even out, the camera

window returns to normal.

lines on the

screen.

• There is a bright fight source in the

camera angle of view.

•Either remove the fight source, adjust the angle so that the fight does not come

into the angle of view, or change the mounting location of the main unit. (See

"ADJUSTMENTS".)

©The screen is

flickering.

• There is a fluorescent lamp nearby.

• This is not a breakdown. Block out the fight from the fluorescent lamp.

WARRANTY

Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of

two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon

which examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make the final

decision whether there is a defect in materials and/or workmanship; and whether or not the product is within the warranty. This

warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in violation of

instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This warranty does not

cover batteries or damage caused by batteries used in connection with the unit. This warranty covers bench repairs only, and any

repairs must be made at the shop or place designated in writing by Aiphone. Aiphone will not be responsible for any costs incurred

involving on site service calls.

1 2

Summary of Contents

Page 1 - ®AIPHONE

INSTALLATION MANUALJDW-C (Sensor Camera)®AIPHONEProviding Peace of Mind0305®NAMES & FUNCTIONSSPECIFICATIONSIModel No.JDW-CPower Supplied from the

Page 2 - ADJUSTMENTS

®AIPHONE‘AlPHONE CO., LTD., NAGOYA, JAPAN AlPHONE CORPORATION, BELLEVUE, WA, USA AlPHONE S.A., WISSOUS, CEDEX, FRANCEMOUNTING AND CONNECTIONSETTINGSRe

Comments to this Manuals

No comments

Aiphone JDW-C User Manual

Browse online or download User Manual for Safety Aiphone JDW-C. Aiphone JDW-C User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Safety Aiphone JDW-C